Package com.inet.viewer

Interface ReportViewer

All Superinterfaces:
ViewerComponent
All Known Implementing Classes:
SwingReportViewer
public interface ReportViewer extends ViewerComponent
This is the top level viewer instance of the i-net Clear Reports report viewer, and allows creation, retrieval, and removal of one or more ReportViews. To create a ReportView, a RenderData object is necessary, in order for the ReportView to be able to fetch its report data. This class also holds the tool bar which can be used to fire actions, add or remove buttons.
Since:
7.0

  • Field Details

    • PROP_STATUS_MESSAGE

      static final String PROP_STATUS_MESSAGE
      Property for use by the PropertyChangeListener, standing for a change in the status bar message
      Since:
      7.0
      See Also:

    • UIPROP_SCROLLPANE_BACKGROUND

      static final String UIPROP_SCROLLPANE_BACKGROUND
      UI property key for setting the background color in the scroll pane area of the Viewer where no page can be seen. If no property is set, Color.LIGHT_GRAY is taken by default.
      See Also:

  • Method Details

    • getCurrentReportView

      ReportView getCurrentReportView()
      Returns the currently visible or selected ReportView object. Note that this will return null if no ReportView is currently visible or selected.
      Returns:
      Currently active ReportView, or null if none is currently active
      Since:
      7.0

    • getReportViewCount

      int getReportViewCount()
      Returns the number of ReportViews registered and added to this viewer. The return value -1 is the maximum allowed index for getReportView(int).
      Returns:
      The number of ReportViews held by the ReportViewer
      Since:
      7.0

    • getReportView

      ReportView getReportView(int i)
      Returns the report view at the given index. Note this report view need not be the current report view or even visible. The maximum allowed index is getReportViewCount()-1, the minimum allowed is 0.
      Parameters:
      i - Index of report view to fetch.
      Returns:
      ReportView at the index given
      Throws:
      IndexOutOfBoundsException - If index is smaller than 0 or is greater than or equal to getReportViewCount().
      Since:
      7.0

    • setCurrentReportView

      void setCurrentReportView(ReportView view)
      Sets which ReportView is currently selected and to be affected by any toolbar actions, etc. Any time the toolbar or group view needs to fire an action, it asks the viewer for the current report view via getCurrentReportView(). This method makes sure that the correct report view is set as "current".
      Note that this method also notifies each ReportViewChangeListener of a change in the currently selected report view.
      Note also that "null" is allowed here which causes no view at all to be viewed as the currently selected report view.
      Parameters:
      view - ReportView to give focus to and to set as "current" report view.
      Since:
      7.0
      See Also:

    • getToolBar

      ToolBar getToolBar()
      Returns the current ToolBar - this tool bar belongs to the currently visible or selected ReportView object. This object is responsible for various user actions for navigating through the report, printing, etc.
      Returns:
      ToolBar of current ReportView
      Since:
      7.0

    • addReportView

      void addReportView(ReportView view, boolean isClosable)
      Adds a given ReportView to the ReportViewer - this ReportView need not be initialized at this point in time.
      Note that as long as the viewer exists, this report view will be held in memory, unless it is removed via closeReportView(int) or closeAllReportViews().
      Parameters:
      view - ReportView to add
      isClosable - Whether the report view is to have a close button
      Since:
      7.4
      See Also:

    • addNewReportView

      ReportView addNewReportView(RenderData data, boolean isClosable)
      Creates a new ReportView object, using the RenderData parameter as its source of report data. Also adds this newly created ReportView to the ReportViewer, therefore this view should not simply be added somewhere else without first removing it from the viewer. Note that as long as the viewer exists, this report view will be held in memory, unless it is removed via closeReportView(int) or closeAllReportViews().
      If a report with precisely the same properties has already been added, this will not create an identical second view, rather it will give focus to the view already opened. If you want to add two identical reports to the same viewer, simply add an identifying property to the report views, such as a time stamp.
      Parameters:
      data - RenderData object specifying the source of report data
      isClosable - Whether the report view is to have a close button
      Returns:
      Newly created ReportView - this ReportView has now been added to a ReportViewer and should not simply be added somewhere else without first removing it from the viewer.
      Since:
      7.4
      See Also:

    • addReportView

      void addReportView(ReportView view)
      Adds a given ReportView to the ReportViewer - this ReportView need not be initialized at this point in time.
      Note that as long as the viewer exists, this report view will be held in memory, unless it is removed via closeReportView(int) or closeAllReportViews(). In this case, it can not be added back to the viewer via this method. Instead it must be recreated with the RenderData.
      Note also that the report view will not have a close button if it is the first report view added to the viewer, otherwise it will. If you'd like to customize this behavior, use the method addReportView(ReportView, boolean) instead, where you can manually set whether or not the view is to have a close button.
      Parameters:
      view - ReportView to add
      Throws:
      IllegalStateException - if this view has previously been removed via closeReportView(ReportView) or closeReportView(int) or closeAllReportViews().
      Since:
      7.0
      See Also:

    • addNewReportView

      ReportView addNewReportView(RenderData data)
      Creates a new ReportView object, using the RenderData parameter as its source of report data. Also adds this newly created ReportView to the ReportViewer.
      Note that as long as the viewer exists, this report view will be held in memory, unless it is removed via closeReportView(int) or closeAllReportViews(). In this case, it can not be added back to the Viewer via this method. Instead it must be recreated with the RenderData.
      Note also that the report view will not have a close button if it is the first report view added to the viewer, otherwise it will. If you'd like to customize this behavior, use the method addNewReportView(RenderData, boolean) instead, where you can manually set whether or not the view is to have a close button.
      If a report with precisely the same properties has already been added, this will not create an identical second view, rather it will give focus to the view already opened. If you want to add two identical reports to the same viewer, simply add an identifying property to the report views, such as a time stamp.
      Parameters:
      data - RenderData object specifying the source of report data
      Returns:
      Newly created ReportView - this ReportView has now been added to a ReportViewer and should not simply be added somewhere else without first removing it from the viewer.
      Throws:
      IllegalStateException - if this view has previously been removed via closeReportView(ReportView) or closeReportView(int) or closeAllReportViews().
      Since:
      7.0
      See Also:

    • closeReportView

      void closeReportView(int index)
      Permanently closes and removes the ReportView at the given index, 0-based. That is, closeReportView(0) will close and remove the first ReportView added to the Viewer, closeReportView(1) the second, etc. This will also close any currently open connections to the ReportView's RenderData object. Note that this causes the report view to be disposed of - trying to add it back to the viewer via addReportView(ReportView, boolean) will result in an IllegalStateException. Instead simply create a new report view with the same RenderData. If there is no ReportView at this index, this method will throw a ViewerException.
      Parameters:
      index - Index of ReportView to close and remove.
      Since:
      7.0

    • closeReportView

      void closeReportView(ReportView view)
      Permanently closes and disposes the ReportView given as the parameter and removes it from the ReportViewer. This will also close any currently open connections to the ReportView's RenderData object. Note that this causes the report view to be disposed of - trying to add it back to the viewer via addReportView(ReportView, boolean) will result in an IllegalStateException. Instead simply create a new report view with the same RenderData.
      Parameters:
      view - ReportView to close and remove from the ReportViewer
      Since:
      7.0

    • closeAllReportViews

      void closeAllReportViews()
      This method permanently closes and removes all ReportViews currently in the ReportViewer. This will also close any currently open connections to the various RenderData objects to which the ReportViews are connected. Note that this causes the report views to be disposed of - trying to add one of them back to the viewer via addReportView(ReportView, boolean) will result in an IllegalStateException. Instead simply create a new report view with the same RenderData.
      Since:
      7.0

    • addReportViewChangeListener

      void addReportViewChangeListener(ReportViewChangeListener rvcl)
      Adds an ReportViewChangeListener to the ReportView.
      Parameters:
      rvcl - the ReportViewChangeListener to be added
      Since:
      7.0

    • removeReportViewChangeListener

      void removeReportViewChangeListener(ReportViewChangeListener rvcl)
      Removes an ReportViewChangeListener from the ReportView.
      Parameters:
      rvcl - the listener to be removed
      Since:
      7.0

    • setHasGroupTree

      void setHasGroupTree(boolean hasGroupTree)
      Sets all report views to whether or not they are to show a group tree. If this is false, the report views are not to show any group tree, regardless of whether or not their reports have groups.
      Parameters:
      hasGroupTree - Are all report views to show a group tree?
      Since:
      7.0

    • hasGroupTree

      boolean hasGroupTree()
      Returns whether the global "hasGroupTree" setting is on or off (by default it is on). Note that there can always be local exceptions to this rule.
      Returns:
      Global "hasGroupTree" setting
      Since:
      7.0

    • setHasStatusBar

      void setHasStatusBar(boolean hasStatusBar)
      Sets for all report views whether or not they are to show a status bar. If this is false, the report views are not to show a status bar.
      Parameters:
      hasStatusBar - Are all report views to show a status bar?
      Since:
      7.0

    • hasStatusBar

      boolean hasStatusBar()
      Returns whether the global setting of "hasStatusBar" is on or off (by default it is on).
      Returns:
      Global "hasStatusBar" setting
      Since:
      7.0

    • getProgressPool

      ProgressPool getProgressPool()
      Returns the ProgressPool of the viewer. The ProgressPool handles all progresses of the viewer. You can add listeners to the ProgressPool to watch status changes of the progresses.
      Returns:
      Returns the ProgressPool of the viewer.
      Since:
      7.0

    • addStateChangeListener

      void addStateChangeListener(PropertyChangeListener l)
      Adds a PropertyChangeListener to the listener list. The listener will be informed about status changes of all progresses and messages changes in the StatusBar.
      Parameters:
      l - PropertyChangeListener to add to the list of listeners
      Since:
      7.0

    • removeStateChangeListener

      void removeStateChangeListener(PropertyChangeListener l)
      Removes a PropertyChangeListener from the list of listeners.
      Parameters:
      l - PropertyChangeListener to remove from the list of listeners.
      Since:
      7.0

    • setViewerContext

      void setViewerContext(ViewerContext context)
      Sets the ViewerContext for this viewer, used for reacting to and handling events which occur in the viewer.
      Parameters:
      context - ViewerContext to use for this viewer. Can not be null.
      Throws:
      IllegalArgumentException - If context is null.
      Since:
      7.0
      See Also:

    • getViewerContext

      ViewerContext getViewerContext()
      Returns the current ViewerContext for this viewer, which is used for reacting to and handling events occurring in the viewer. By default, this will return an instance of SwingViewerContext.
      Returns:
      ViewerContext used by this viewer
      Since:
      7.0
      See Also:

    • setCustomPromptEditor

      void setCustomPromptEditor(String promptName, int valueType, CustomPromptEditor editor)
      Registers the given CustomPromptEditor for prompts with the given name and value type, case-insensitive. Setting null as the editor unregisters any CustomPromptEditor for the given name and value type. An existing CustomPromptEditor for the given name and value type will be replaced with the one set with this method. Depending on the value type of the prompt, your custom prompt editor should return one of the following types:

      • If a multiple prompt, a vector containing one or more single values.
      • If one of the values is a range, it should be a RangePromptValue.

        For single value prompts:

        • String for value type PromptData#STRING
        • Double for value type PromptData#NUMBER and PromptData#CURRENCY
        • Boolean for value type PromptData#BOOLEAN
        • Date for value type PromptData#DATE and PromptData#DATETIME
        • Time for value type PromptData#TIME
        • byte[] for value type PromptData#BINARY
      Parameters:
      promptName - name of prompt to register custom prompt editor for, may not be null
      valueType - value type of the promptName. Use the constants form the class PromptData for the types.
      editor - custom prompt editor for prompting certain prompts with your own components.
      Throws:
      NullPointerException - if promptName is null
      Since:
      9.0